• A Transformer[+] is an electrical device that transfers energy from one circuit to another by magnetic coupling with no moving parts. A transformer comprises two or more coupled windings, or a single tapped winding and, in most cases, a magnetic core to concentrate magnetic flux. A changing current in one winding creates a time-varying magnetic flux in the core, which induces a voltage in the other windings. The transformer is one of the simplest of electrical devices, yet transformer designs and materials continue to be improved. Transformers come in a range of sizes from a thumbnail-sized coupling transformer hidden inside a stage microphone to huge gigawatt units used to interconnect large portions of national power grids. All operate with the same basic principles and with many similarities in their parts.

The Hilden-Brand electromagnetic valve[+] has a permanent magnet core encaged in an iron cylinder. The cylinder closes the magnetic circuit, turning on the coil makes the iron wrapper assume the same polarity as the magnet inside of it. The permanent magnet isn't in a close circle now so it amplifies the electromagnet.

  • Hildenbrand: I had been working on and off on a magnetic holding device before and I figured it would be a good time to continue working on it. Well I experimented with the device for several years and finally got it working the way I wanted it. This device increases the holding power of an electromagnet to four times its original power. And also provides a way to turn a permanent magnet on or off to any external metal objects. After experimenting with this new device I realized that it could also be used to generate power as in a motor. I then spent several weeks building a test device to see if this could be used to power an electric motor. The first motor I built was very small but worked exceptionally well. It produced about 1/16 hp and turned around 6000 rpm.

So I was thinking to build a transformer by that concept, a nice solid-state electric energy amplifier.

Looks to me like it can only work. :-)

In case the flux doesn't want to go true the coil I've designed an oscillator by the same concept.

The magnet in the center is pulled thru the coil from left to right by the hilden-brand coils at the left and right of it. The 3 enclosed systems should not interfere to much.


http://www.keelynet.com/energy/emery.htm

http://www.cheniere.org/misc/astroboots.htm

http://blog.360.yahoo.com/Factuurexpress?&tag=hildenbrand&list=1

http://www.overunity.com/index.php?topic=833.0

http://www.keelynet.com/energy/hildenbrand.htm

http://peswiki.com/index.php/Director:Hilden-Brand_Electromagnet_Motor

discussion:

http://blog.360.yahoo.com/Factuurexpress?p=5598
http://hutchisoneffectonline.com/forum/index.php?topic=2192.0
http://www.steorn.net/forum/comments.php?DiscussionID=42711